Pojdi na: content | sidebar

Energy solution for future - CHP heat and power from biomass

CHP - three main stages:

  1. Gasification of dry wood chips. Gasification reactor is fully automatic and it generates tar-free SynGas.
  2. Gas purification and cleaning. All mineral dust particles are removed by fabric filter. Heat is recovered by heat exchangers and can be used for heation.
  3. CHP unit. Wood gas is fed to a combustion engine. Heat is collected from engine cooling fluid and exhaust fumes. The engine runs a generator that produces clean domestic green electricity. Frequency can be 50 or 60 Hz. Electric power is 28 kW or 40 kW (netto).

tehnologija-biomasna-SPTE

 

 

 

1. CHP-PLANT (heat and power)

Standard solution where Volter power plant works parallel with grid.

heat and power from biomass chp

 

2. OFF-GRID ISLAND + DIESEL BACK-UP

Pure off-grid island with Volter 30, batteries and diesel back-up. Solution to areas without the grid.

biomass-electric-generation-chp

 

3. CHP-PLANT + DIESEL BACK-UP

Standard solution where Volter power plant works parallel with grid. If grid is down, Volter power plant can
operate in island mode parallel with diesel back-up.

electric-grid-biomass-chp

 

4. CHP-PLANT / OFF-GRID ISLAND

Continuous island with connection to Volter power plant, batteries and grid. Continuous supply to island and electricity production even with fault on grid. Good solution to areas where grid is weak.

biomass-CHP-grid

 

 


Kontakt: United Vision Studio, Radoslav Irgl s.p.
+386 (0)40 427 173, E-mail

Return to top